TSC Lp-k
Single column tensile-compression test device
Single-column test machines are generally designed for low-capacity (e.g., 300 kgF ≈ 3 kN) test applications. Due to their compact design, small footprint, and high precision, these machines are widely preferred for material testing across many industries. Below are the usage areas and industry-specific applications:
Applications (up to 300 kgF)
Tensile Tests
- Strength and elongation testing of materials such as thin plastic films, textile strips, yarns, fibers, elastomers, and small metal parts.
Compression Tests
- Compressive strength testing of rubber, foam, packaging sponge, and small-sized plastic or metal specimens.
Tear Tests
- Measurement of tear resistance for materials like bags, textiles, films, and packaging (e.g., ASTM D1004, ISO 6383).
Peel Tests
- Measurement of 90° or 180° peel force for adhesive tapes, laminated materials, medical adhesives, and labels.
Bond Strength and Adhesion Tests
- Testing the bond strength between two surfaces (e.g., injection-molded part + insert).
Three-Point Bending Tests
- Measuring the flexural modulus and strength of plastic or composite specimens.
Commonly Used Industries
| Industry | Application Examples |
|---|---|
| Plastic & Polymer | Tensile, peel, and tear tests on films, sheets, and injection-molded samples |
| Packaging & Paper | Paper strength, film tear resistance, label peel tests |
| Textile & Leather | Stitch, yarn, fabric break and elongation tests |
| Medical Devices | Tests on injection-molded parts, medical tapes, and textile-based medical products |
| Electronics | Bond force of small components, cable stripping, solder joint testing |
| Automotive Parts | Strength testing of plastic clips, seals, foams, and adhesive parts |
| Food Packaging | Lid-peeling, vacuum packaging, barrier film tests |
| R&D and Education | General-purpose testing in materials science laboratories |
Why Choose a Single-Column System?
- Compact design: Easily fits on a laboratory bench
- Low cost: More economical than high-capacity dual-column systems
- Precision: High accuracy in low-force applications
- User-friendly: Easy programming and graphical data monitoring with +Lp TCTP software
Software
- The device operates with +Lp TCTP software. Relevant test standards are preloaded, and new templates can be created by modifying parameters of standard templates. After selecting the desired test type at startup, tests are performed using standard or custom templates containing relevant parameters. Up to 10 test specimens can be tested in a single session. At the end of the session, reports can be exported in PDF, Excel, and other formats. Archiving and archive recall features are supported. Test parameters are automatically transmitted to the device via software—no manual data entry is required. Tests can be initiated either from the software or the device, and the system automatically ends the test when stop conditions are met. The software has a flexible user interface, is easy to use, and supports both Turkish and English by default. For other language options, please contact our company.
Customization
- Our devices support customization to comply with different standards, and the software can be updated or expanded according to specific development requirements.
Economy
- We also develop economic model test machines tailored for laboratories and facilities with low testing frequency. These models stand out with a simplified structure that covers essential testing needs. Thanks to their easy-to-use interface, compact design, and affordable cost, they offer a practical and sustainable solution for users performing a small number of tests. In low-load test applications, they ensure accurate and reliable results without compromising compliance with international standards. We would be happy to assist you with your economical testing equipment needs.
| Category | Feature | Description / Value |
|---|---|---|
| General Information | Model No | [TSC-Lp 3kN] |
| Manufacturer / Brand | [Artı Limit] | |
| Application Area | [Metal, Plastic, Textile, Composite, Spring etc.] | |
| Test Type | [Tensile, Compression, Bending, Tearing, Peeling, Bond, Adhesion, 3-Point Tests] | |
| Load Capacity | Maximum Force | [5 kN] |
| Load Cell Accuracy | [±0.5% FS] | |
| Load Cell Type | [S-Type Load Cell] | |
| Motion System | Maximum Stroke (excluding grips) | [1100 mm] |
| Test Area Width | [150 mm] | |
| Speed Range | [0.001 mm/min – 1000 mm/min] | |
| Speed Accuracy | [±0.1%] | |
| Drive Type | [Delta Servo Motor + Ball Screw] | |
| Measurement Systems | Extension Measurement Type | [Optical Encoder standard, Options: Extensometer, LVDT, Video Extensometer, Epsilon Extensometer] |
| Extension Measurement Accuracy | [e.g. ±0.05 µm] | |
| Force Measurement Range | [1% - 100% FS] | |
| Grips and Holders | Grip Type | [Manual, Pneumatic] |
| Sample Type | [Flat, Round, Dumbbell, Threaded, etc.] | |
| Clamping Capacity | [1 mm – 10 mm flat], Custom options available | |
| Software & Control | Control System | [PLC Controller and HMI Interface] |
| Software Name | [+Lp TCTP] | |
| PC-Device Communication | [Modbus TCP, Sampling rate up to 100 Hz] | |
| Reporting Capability | [PDF, Excel, Graph, Standard Compliant] | |
| Standards Compliance | [ASTM E8, ISO 6892-1, ISO 527, etc.] | |
| Power & Physical Specs | Power Requirement | [220 V AC – 50-60 Hz] |
| Device Dimensions (H x W x D) | [1450 x 900 x 460 mm] | |
| Weight (varies by model & equipment) | [60 – 80 kg] | |
| Safety Features | [Emergency Stop, Adjustable Upper-Lower Limits, Software Overload Protection, Automatic Slowdown at 90% Load, Protective Enclosure (Optional)] | |
| Optional Accessories | [Extensometer, LVDT, 90° or 180° Peel Test Fixtures, Special Plate for COF Testing] |
Relevant Test Standards (ASTM / ISO)
Tensile Test
- ASTM D638: Tensile properties of plastics
- ISO 527: Tensile testing of plastic and composite materials
- ASTM D882: Tensile test for thin plastic films
Tear Test
- ASTM D1004: Tear resistance of plastics
- ISO 6383-2: Tear testing for films and sheets
Peel Test
- ASTM D903: Peel or stripping strength of adhesive bonds
- ASTM F88: Seal strength testing for medical packaging
- ISO 8510: Peel test for bonded joints
Compression Test
- ASTM D695: Compressive properties of rigid plastics
- ISO 604: Compressive properties of plastics
Bending Test
- ASTM D790: Three-point bending test for plastics
- ISO 178: Flexural modulus of thermoplastics
Adhesion / Bond Strength Tests
- ASTM D1876: T-peel test
- ASTM D3163: Bond strength of plastic assemblies
Industry-Specific Application Scenarios
Packaging Industry
- Tensile testing of films and foils (ASTM D882)
- Lid–packaging peel tests (ASTM F88)
- Lamination adhesion tests (ASTM D903)
Textile Industry
- Yarn breaking strength (ISO 2062)
- Fabric tensile and tear tests (ASTM D5035, D1424)
- Seam strength testing
Medical Industry
- Adhesive strength of medical tapes (ASTM D3330)
- Seal integrity testing (ASTM F88)
- Syringe plunger resistance tests
Plastics & Polymers
- Tensile testing of injection-molded samples (ASTM D638)
- Flexural testing of composite materials (ASTM D7264)
- Bond strength of molded parts
Education / R&D
- Material science experiments (tensile, bending, fracture)
- Data logging and graphical test analysis
- Specimen calibration and standard comparisons